Working Pressure : 40 - 170 Psi. Lock the hose and spout securely provide a safe operation. Release the negative pressure when extracting, press the decomression valve to make a fluent extraction.
The spout was designed as eagle mouth to make it fluent and prevent spilling out. NOTICE: Do Not Turn The Tank Upside Down To Pour Out Oil. When The Fluid Goes Over The Limited Draining Line, It Will Flow Into The Air Hose And Lead To Leakage. Special design stop button to avoid oil spilling out when remove tubes.
Start the engine, make sure the oil is warm, and make it smoother when pumping. TIPS: Turn Off The Engine And Let It Cool Down For At Least 15 Min. If The Engine Is Cold, Start It Up And Run It For A Couple Of Minutes. Insert the extractor tube into the dipstick pipe until it reaches the bottom of the oil pan. Choose the fuction you need.
After extracting, turn the tube in the oil pan to make sure all the oil done. After extraction, clean the hose with rub, remove the hose and connect the pouring spout. Pour out the used oil and recycle. Diameter : 5.3 × 6.7 mm / Length : 39.3 Inches B.
Diameter : 4.0 × 6.0 mm / Length : 39.3 Inches + Wire C. Diameter : 7.8 × 9.8 mm / Length : 39.3 Inches D. (Brake Bleeding Tube) Diameter : 4.0 × 8.0 mm / Length : 59 Inches E. Extractor Pump Extended Tubes The Nylon Hoses Are Consumables In The Set And Should Be Changed When They Are Worn Out Get New Ones By Searching EWK Extractor Hose.
The item "EWK 15L Pneumatic Air Manual Hand Oil Fluid Extractor Vacuum Pump" is in sale since Wednesday, April 5, 2017. This item is in the category "eBay Motors\Automotive Tools & Supplies\Air Tools\Other Automotive Air Tools". The seller is "ewktool_ny" and is located in Walton, Kentucky.
This item can be shipped worldwide.