Readout says 83 minutes total time on unit, it arrived with 75 from the factory (I assume end of line testing), Before listing I had it pull down a vacuum chamber to make sure everything works correctly. May have some dust/scuffs from storage. Still has plastic over LCD screen and zip ties on the cord from the factory. Elitech SVP-7 2 Stage 7CFM 3/4Hp Rotary Vane AC Air Vacuum Pump HVAC Refrigerant.
Built-in Vacuum Sensor VS Micron Gauge: Due to the different placements of vacuum sensors, the vacuum reading of the pump may vary with the micron gauge which is connected to the system. The airflow is not the same at different placements in the system when vacuuming.
The air density is larger which is far away from the pump, so the readings of vacuum are high. When starting vacuuming, the pressure is relatively high, the air outlet is large. The vacuum pump has a large exhaust volume. So there will be oil mist overflowing with gas. This is a common feature of rotary vane vacuum pumps.
Oil mist appears at first which is a normal phenomenon. When the vacuum drops to a very low value, the exhausting volume is small and there will be no oil mist.
Therefore, the vacuum pump should regularly inspect the oil level to avoid running out of oil. Intelligent Control Motor and Solenoid Valve. Reach the target vacuum value and holding time, the motor will stop automatically. When the vacuum pump increase, the motor will start work automatically.
When oil and shell temperature exceeds the limit, the motor will stop automatically within 10s. When motor stops for 1s, the solenoid valve will close automatically to avoid the oil be suck to vacuum sensor. View Vacuum Change in Real Time. When the vacuum value drops below 60,000 microns, the real-time vacuum graph and value will display.Notes: Above 60,000 microns, vacuum value is not shown and screen shows. The waiting time for the vacuum reading is longer for a large system. Vacuum Pump show the high temperature and low temperature icon. App push the alarm notification with sound and vibration.
The main workbench of APP shows High in red or Low in blue under the oil and case temp part. Set the holding time to let the vacuum pump continue working after the target value is state. When the vacuum is stable, check the leakage possibility from 0 to 100 levels. The larger the number, the greater the possibility of the leakage.When the vacuum is stable, the vacuum pump and App shows the estimated job completion time including holding time. View historical data and export by Excel or PDF via App. Allow uses further analysis the data. Thanks for Shopping at my small business. Please take a moment to check out my other Items available in my store. You won't be disappointed! There are discounts for multiple item orders on most listings. Orders place before 3:00PM EST will go out the same day! This item is in the category "Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Tools\Refrigerant Evacuation Pumps".
The seller is "monsonmachine12" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Panama, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay, Philippines, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands.