Healthcare, Lab & Life Science. 1/1 Inlet&Outlet Air Operated Double Diaphragm Pump for Chemical Industrial Use. Product parameters: Product parameters: Product: Diaphragm pump Type: Double diaphragm Operation Type: Air-operated Model: QBY4-1599 Packing size: 29.00 x 17.00 x 19.50cm Weight: 4kg Self-priming head: 0-10m Maximum particle diameter: 4mm Suction and discharge outlet: 1 inch Inlet Port: 1 inch Outlet Port: 1 inch Max PSI: 101 PSI Compressed air inlet: 10 inch Maximum lift: 70m Operating temperature: no more than 70 degrees Celsius Application: Industrial Features: The all-plastic pneumatic diaphragm pump can not only pump flowing liquids, but also transport some difficult-to-flow media.It has many advantages of self-priming pumps, submersible pumps, canned motor pumps, mud pumps and impurity pumps. No need to irrigate and divert water, the suction range is as high as 10m, the head is 70m, and the outlet pressure is =6kgf/cm2; 2. The flow is spacious, the passing performance is good, and the maximum particle diameter allowed is 4mm. When pumping mud and impurities, there is little wear on the pump; 3. The head and flow can be adjusted steplessly through the valve opening (air pressure adjustment is between 1-7kgf/cm2); 4. The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the conveyed medium will not leak out. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety; 5. There is no need to use electricity, and it is safe and reliable to use in flammable and explosive places; 6. Can be submerged in the medium to work; 7. Easy to use and reliable in work To start and stop, you only need to simply open and close the gas valve. Even if the pump runs without medium for a long time or suddenly stops due to unexpected circumstances, the pump will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. Simple structure and few wearing parts The pump is simple in structure, easy to install and maintain.
The medium conveyed by the pump will not touch the moving parts such as the built-in valve, linkage, etc. Unlike other types of pumps due to the wear of rotors, pistons, gears, vanes and other components. It can transport relatively viscous liquids (viscosity below 10,000 centipoise); 10.
The pump does not need to be lubricated with oil [The main purpose] 1. Pump peanut butter, kimchi, mashed potatoes, red sausage, chocolate, hops, syrup, etc. Pump paint, pigments, glue, adhesives, etc. Pump all kinds of tiles, porcelain, bricks and pottery glaze slurry, etc. Pump various abrasives, corrosives, cleaning grease, etc.
The pump sucks various highly toxic, flammable, and easy-to-use liquids, etc. Pump various sewage, cement grouting and mortar, etc. Pump various strong acids, strong alkalis, strong corrosive liquids, etc. As the front-stage pressure sending device of various solid-liquid separation equipment.
Packing list: Yellow valve body plastic diaphragm pump. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "1 Inlet&Outlet Air-Operated Double Diaphragm Pump Petroleum Fluids Waste Oil US" is in sale since Thursday, November 26, 2020. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "lovehome-zone" and is located in Dayton, New Jersey. This item can be shipped to United States.